Vuze Forums

Hi guys, pretty new to vuze but have just encountered my 1st problem, while using the configurtion wizard lately i keep getting this message...Checking for Middleboxes  . . . . . . . . . . . . . . . . . .
No results were received. Either the test server is unavailable or network problems are preventing the test from running correctly. Please try again. i thought initially it was a gliche with vuze but has been like this for over a week, my nat/firewall test comes back ok when i test that seperately and im still getting pretty good download and upload speeds, just stumped as to why i cant run the whole test. Many thanks in advance ;-)

Weird, 'works for me' ™

Pausing downloads before performing test...................................................

TCP/Web100 Network Diagnostic Tool v3.6.2b
** Starting test 1 of 1 **
Connecting to 'ndt.iupui.mlab2.nuq04.measurement-lab.org' [ndt.iupui.mlab2.nuq04.measurement-lab.org/66.110.32.88] to run test
Connected to: ndt.iupui.mlab2.nuq04.measurement-lab.org--  Using IPv4 address
Checking for Middleboxes  . . . . . . . . . . . . . . . . . .
Done.
Checking for firewalls . . . . . . . . . . . . . . . . . . .
Done.
running 10s outbound test (client-to-server [C2S]) . . . . .
22.92Mb/s
running 10s inbound test (server-to-client [S2C]) . . . . . .
10.36Mb/s
The slowest link in the end-to-end path is a
100 Mbps
Full duplex Fast Ethernet subnet
Information: Other network traffic is congesting the link
Completed: up=2.73 MB/s, down=1.24 MB/s


Wonder if you are hitting a speed-test server that isn't working correctly (unfortunately the server is auto-selected by MLAB so you can't explicitly test against another one :( )

very weird....it checks for middleboxes for about a minute then comes up with the message i posted in my original thread, like i said doesnt affect my d/l or u/l but is rather annoying i cant run the complete test lol