Posts: 5
Threads: 1
Joined: Mar 2015
Reputation:
0
03-13-2015, 06:23 PM
(This post was last modified: 03-20-2015, 10:33 AM by Zepoolpe.)
Hello,
I had Vuze running quite nicely until i installed version 5.6.
Since then, I have the little red icon of doom: "Firewalled/NAT reachability problem"... [img=18x16]sad_smile.gif
I am using a VPN service.
I am using port 41026 and UPnP is activated, but the 41026 port is forwarded anyway on my router.
Vuze of course is allowed in my firewall.
As I said, it was working until I installed v5.6 so something (computer? router? ISP? VPN?) must not sit well with v5.6.
Any ideas?
PS: i've tried to change to several different ports (all of them forwarded on my router) but nothing works: "canyouseeme" return everything as "blocked"!?
Posts: 2
Threads: 0
Joined: Mar 2015
Reputation:
1
Same problem here.
Right before the update, everything worked fine; right after it, no download, no upload, only 24 "users" online, as seen by Vuze.
Another oddity, after the update, Java "disappeared" from my control panel. Had to reinstall Java 8 update 40 to see it again.
Am using Windows 7 64 bits. Still the same executable, Program files (x86)/Vuze/Azureus.exe, so nothing should have changed. No notifications from Vuze or Windows firewall about something being wrong. When testing my TCP or UDP ports, it fails: on TCP it says "Test impossible (error: unexpected end of file from server)". When testing UDP it simply does not answer anything. I looked also at the advanced network config, binding options: the right interface (wlan0[1] in my case, referring to the IPV6 of my wifi card) is used.
So, I'm in the dark here. it appears that the JRE is now inside the Vuze folder, for some reason. I tried to add the javaw.exe file to the exceptions of the firewall: it did not change anything.
Can anyone help?
Thank you very much!
Posts: 5
Threads: 1
Joined: Mar 2015
Reputation:
0
Alternately, is there a place where we can still download the latest 5.5 version?
Posts: 1
Threads: 0
Joined: Mar 2015
Reputation:
0
I signed up here because I've been unable to get anything to work, only to realize upon reading this thread it all only stopped working since I'd updated.
Uninstalled, re-installed an old copy I'd had on back-up for just such an event: boom, everything working again.
Posts: 5
Threads: 1
Joined: Mar 2015
Reputation:
0
03-24-2015, 02:04 PM
(This post was last modified: 03-24-2015, 02:11 PM by Zepoolpe.)
So, again, anyone knows here to DL the latest 5.5 version?
(I'm asking because so far every time I've google "vuze 5.5" it ultimatly linked me to the 5.6 one)
Posts: 3
Threads: 0
Joined: Mar 2015
Reputation:
1
Hmmm... I reinstalled v5.5 and it did not work for me. I'm not sure if something else is blocking the port... more troubleshooting to do.
Posts: 2
Threads: 0
Joined: Mar 2015
Reputation:
1
03-27-2015, 12:05 PM
(This post was last modified: 03-27-2015, 12:30 PM by greyhame.)
Same for me. Still not working at all in 5.5; although this is maybe because the old settings from 5.6 were not cleared. I will also look deeper into this. annoying...
EDIT: I simply removed the "bind to IP" setting (put nothing in the box). Although I thought I picked the right interface, apparently I was wrong. It works again...I will see later if it still works in 5.6 (I'm still in the restored 5.5 version)
Posts: 5
Threads: 1
Joined: Mar 2015
Reputation:
0
03-28-2015, 04:49 AM
(This post was last modified: 03-28-2015, 04:50 AM by Zepoolpe.)
Tx Funguy for the link and tx greyhame for the tip: it works... welll , i'm still shown as firewalled but for some reason it's back the usual DL & UL rate i was used to...
EDIT: I had a prompt to bind it back .. i tested it, restarted Vuze and now I'm back to green! :)
